8.1P Table. Deakin University CS SIT111
#11 N/A The DRegister
is set to
17
m-Register is
the memory
store that
holds variable
i RAM(17)
N/A Instruction
memory is
set to the
address #12
Program counter of PC++
increments by 1 each line.
Set to instructions address
#12
The control bits are sent to
D-register to load value
(17). Address of variable (i)
is put into address bus.
...[Show More]
8.1P Table. Deakin University CS SIT111
#11 N/A The DRegister
is set to
17
m-Register is
the memory
store that
holds variable
i RAM(17)
N/A Instruction
memory is
set to the
address #12
Program counter of PC++
increments by 1 each line.
Set to instructions address
#12
The control bits are sent to
D-register to load value
(17). Address of variable (i)
is put into address bus.
Control bits are sent to PC
to add 1 to the value
#12 N/A N/A m-Register is
the memory
store that
holds variable
i RAM(17)
The ALU
calculates the
sum of 17 and 0 =
17 and stores the
value in mRegister
Instruction
memory is
set to the
address #13
Program counter of PC++
increments by 1 each line.
Set to instructions address
#13
The control bits are sent to
D-register to load value
(17). Address of variable (i)
is put into address bus.
Control bits are sent to PC
to add 1 to the value
#13 N/A N/A m-Register is
the memory
store that
holds variable
(i) (34)
The ALU
calculates the
sum of 17 and 17
= 34 and stores
the value in mRegister
Instruction
memory is
set to the
address #14
Program counter of PC++
increments by 1 each line.
Set to instructions address
#14
The control bits are sent to
D-register to load value
(17). Address of variable (i)
is put into address bus.
Control bits are sent to PC
to add 1 to the value
#14 N/A The DRegister
is set to
18
m-Register is
the memory
store that
holds variable
(i) (34)
The ALU
calculates the
sum of 17 and 1 =
18 and stores the
value in DRegister
Instruction
memory is
set to the
address #15
Program counter of PC++
increments by 1 each line.
Set to instructions address
#15
The control bits are sent to
D-register to load value
(17). Address of variable (i)
is put into address bus.
Control bits are sent to PC
to add 1 to the value
#15 The ARegister is
set to 18
from the
m-Register
N/A m-Register is
the memory
store that
holds variable
(i) (18)
N/A Instruction
memory is
set to the
address #16
Program counter of PC++
increments by 1 each line.
Set to instructions address
#16
The control bits are sent to
D-register to load value
(17). Address of variable (i)
is put into address bus.
Control bits are sent to PC
to add 1 to the value
#16 N/A N/A m-Register is
the memory
store that
holds variable
(i) (18)
Instruction
memory is
set to the
address
#17
Program counter of PC++
increments by 1 each line.
Set to instructions address
#17
The control bits are sent to
D-register to load value
(17). Address of variable (i)
is put into address bus.
Control bits are sent to PC
to add 1 to the value
#17 The ARegister is
set to 1
from the
m-Register
N/A m-Register is
the memory
store that
holds variable
(i) (1)
Instruction
memory is
set to the
address
#18
Program counter of PC++
increments by 1 each line.
Set to instructions address
#18
The control bits are sent to
D-register to load value
(17). Address of variable (i)
is put into address bus.
Control bits are sent to PC
to add 1 to the value
#18 N/A The DRegister
is set to
0
m-Register is
the memory
store that
holds variable
(i) (1)
The ALU
calculates the
sum of 18 minus
18 = 0 and stores
the value in DRegister
Instruction
memory is
set to the
address
#19
Program counter of PC++
increments by 1 each line.
Set to instructions address
#19
The control bits are sent to
D-register to load value
(17). Address of variable (i)
[Show Less]